TEC7 WP7-201 Spray & Seal Aerosol 500ml

TEC7 WP7-201 Spray & Seal Aerosol 500ml

TEC7 WP7-201 Spray & Seal Aerosol 500ml can be used on hundreds of applications whether sealing, repairing, protection and is compatible with all surfaces. Spray & Seal forms a tenacious, elastic waterproof coating that protects against shocks, stone chips and impact, while also reducing vibration and noise.

• Once fully cured, the product can still be sanded and painted.
• For indoor and outdoor use.
• Instant protection against water & rust.
• Waterproof – windproof.

Application

• Emergency repair of small leaks in roofs
• Sealing leaking gutters
• Sealing screw and drill holes
• Anticorrosion coating of metal components
• Protects auto parts against stone chips
• Sealing roof screws in corrugated sheets
• Protecting and sealing parts of caravan, mobile home, trailer,….
• Protecting parts of boats against splashing (sea) water

Specifications

• Composition: rubber / synthetic resin
• Odor: solvent
• Colour: black
• Consistency: semi-liquid resistant to sagging
• Relative density: 0.8 (+/- 0.03)
• Application temperature: between + 15°C and + 25°C
• Temperature resistance: from -40°C to + 90°C
• Waterproof: immediately
• Skin formation (0.5 mm thickness at 20°C, 50% R.H.): 25 minutes
• Time between 2 layers (0.5 mm thickness at 20°C, 50% R.H.): 10 minutes
• Complete drying (0.5 mm thickness at 20°C, 50% R.H.): 90 minutes
• Paintable: yes
• Resistance: water, seawater, oil, weak acids and bases
• Shelf life: 36 months, in a dry room between + 10°C and + 30°C

Instructions

• Apply onto a clean and dry substrate. If necessary, clean with Tec7 Cleaner and/or Multi-clean. Sand smooth surfaces.
• Shake the can well for 1 minute, after liberating the mixing ball.
• Apply from a distance of 25-40 cm from the surface. Ensure you apply a thin layer first and then build up to a layer thickness of approximately 0.5 mm. Please allow 10 minutes evaporation time between two layers.
• Empty the nozzle by spraying with the can upside down.
• Clean tools immediately with Tec7 Cleaner and hands with Powerwipes or similar type product.
• Do not use in the rain, strong wind or on very warm surfaces.
• Can be painted with most paints and lacquers after 90 minutes.
• Test adhesion on plastics, powder coatings, exotic woods and bituminous materials.
• Do not use in ponds and not water pressure resistant.
• 1 aerosol 500 ml = +/- 1m² (+/- 0.5 mm layer thickness)

See our full range of TEC7 Products here!