Gorilla Epoxy Glue 25ml

Gorilla takes epoxy to the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. Plus, it dries in an ideal, clear finish that makes projects look spotless.

• Bonds: Metal, Wood, Ceramics, Glass, most Plastics and more. *Not recommended for use on polyethylene, polypropylene or similar plastics*

DIRECTIONS: If you’re using Gorilla Epoxy for the first time, or bonding a new type of material, we always recommend trying a test piece first.

1. 1. Prepare your work area: It is recommended to use Gorilla Epoxy in a well-ventilated area. Be sure your work area is protected from spills. A mixing tray and plastic stir stick are provided. To improve adhesion, roughen smooth surfaces before gluing. Clean and dry all surfaces to be bonded.
   2. Mixing Gorilla Epoxy: Remove plastic stir stick from middle of plunger. With package pointing upward remove the closure from the two syringes. With the package still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio. Using plastic stir stick mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes. As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine.‍
   3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken, and the bond strength will decrease the longer you wait to apply.
   4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed.
   5. Storage: To close, slightly pull back on plunger. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly.

Technical Specs

• APPLICATION TEMPERATURE – 50° to 100° F
• SERVICE TEMPERATURE – -10° to 180° F
• OUTDOOR – Yes
• MOISTURE RESISTANT – Water resistant – not recommended for continual water exposure
• PAINTABLE – Yes – Can be painted with latex paint
• SANDABLE – Yes
• STAINABLE – Yes – Can be stained with water based stain
• CURED COLOR – Clear
• STORAGE TIPS – Store in a cool, dry location. Keep resin and hardener separate. Wipe tip clean with a dry cloth.
• GAP FILLING – Yes

Product Features

• DRIES CLEAR: Ideal for clean, easy finishing5 MINUTE SET: Plenty of re-positioning time for the perfect fit.
• GAP-FILLING: Fills voids and bonds uneven and vertical surfaces.
• WATER RESISTANT: Withstands moderate exposure to water
• SOLVENT RESISTANT ONCE CURED
• EASY-TO-USE SYRINGE: Separate barrels of epoxy resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.